WR Gunsmith Tools Stuck Live Round and Broken Case Neck Extractor

WR LIVE & BROKEN ROUND EXTRACTOR TOOLS

==========================================================================WR STUCK LIVE ROUND REMOVAL TOOL.
NOTE:  V3 (all alum and stainless teel) AVAILABLE NOW.

For the removal of a stuck live round from the chamber.
NEVER use a cleaning rod down the barrel of a rifle with a stuck live round. NEVER!
INDIVIDUAL PARTS (and spares):
- PN: 6001, Slide hammer (only) assembly (needed for all options). Rod, slide weight and end nuts. A$59ea (same used for live and broken round tools). AVAILABLE NOW.
- PN: 6002, Live Round Extractor Claw Clamp Tube, A$52ea. AVAILABLE NOW.
- PN: 6003, Live Round Extractor Connecting Extension Rod V3, A$24ea. AVAILABLE NOW.(then selected claw of choice)...
- PN: 6005, Claw for small (223) base size 0.378" (9.6mm).  A$63ea. AVAILABLE NOW.
- PN: 6006, Claw for medium (308) base size 0.473" (12mm). A$63ea. AVAILABLE NOW.
- PN: 6007, Claw for magnum base size 0.532" (13.5mm). A$63ea. SOLD OUT ETA APRIL 26.

COMPLETE KITS:
- PN: 6008, Special 1-claw KIT (4 items - hammer assy, claw tube, connecting rod and choice of 1x claw) A$185ea.  (specify claw choice when ordering)
-PN: 6009, Special 2-claw KIT (all 4 6008 items plus 1x additional claw of choice) A$245ea.
-PN: 6010, Special 3-claw KIT (all 4 6008 items plus 2x additional claws of choice) A$305ea.
ALL LIVE EXTRACTOR KITS - AVAILABLE NOW (pending sizes).

==============================================================================WR BROKEN CASE NECK EXTRACTOR,  AKA SEPARATED CASE NECK EXTRACTOR

For the removal of a case/cartridge neck or body that is left behind in the chamber after separating from case after being fired.  These are gunsmith level tools.
More detail: Typically, a case head separation is when the head (base) of the cartridge breaks off
cartridge body after firing, that is extracted by opening the bolt but leaving the forward section
of the cartridge in the chamber.
This tool is used to extract the broken neck/forward piece of the cartridge left behind in the chamber.

Note: extractors are calibre specific.
INDIVIDUAL PARTS (and spares):
- PN: 6001, Slide hammer (only) assembly (needed for all options). Rod, slide weight and end nuts. (same used for live and broken round tools)
A$59ea  AVAILABLE NOW

...select the inside extractors needed:
- PN: 6011,  22 cal.  A$39ea.
- PN: 6012,   24 cal.  A$39ea.
- PN: 6013,   26 cal.  A$39ea.
- PN: 6014,   28 cal.  A$39ea.
- PN: 6015,   30 cal.  A$39ea. SOLD OUT. Est April.
- PN: 6016,   33 cal.  A$39ea.
- PN: 6017,   37 cal.  A$48ea.
or PN: 6018 Extractors Bundle
(all 7 extractors) A$270ea. 

COMPLETE KITS:
Complete Broken Neck Extractor Kit,
1x 6001 Slide Hammer assy,
1x 6018 Extractors Bundle
(7 extractors), A$329ea.  

==============================================================================KITS:
- STUCK LIVE ROUND REMOVAL, and
- BROKEN CASE NECK EXTRACTOR (COMMON SIZES GUNSMITH KIT).

GUNSMITH KIT of the most common sizes used - being:
- 1x PN: 6001, Slide hammer assembly,- 1x PN: 6002, Live Round Extractor Claw Tube,
- 1x PN: 6003, Connecting Rod, and
Live round extractor claws:
- 1x 223 (PN: 6005),
- 1x 308 (PN: 6006), and
Broken neck extractors:
- 1x 22cal (PN: 6011)
- 1x 24cal (PN: 6012)
- 1x 26cal (PN: 6013)
- 1x 28cal (PN: 6014)
- 1x 30cal (PN: 6015). SOLD OUT. Est April.
10 PIECE COMMON GUNSMITH KIT 
- PN: 6019  A$430ea.
OR
11 PIECE COMMON GUNSMITH KIT
(incl 6007 claw for magnum),
- PN: 6020 A$490ea.